Rubber Conveyor Belts - VSK Industrial Limited

According to reinforcement: NN/EP/ST/SW/IW belt

According to cover compound: Wear resistant, Heat resistant, Oil resistant, Fire resistant belt.

VSK supplies high quality of rubber conveyor belt, for all industrial application.

VSK conveyor belts for general purpose available with following international Standards

DIN Standard
Standard	Tensile Strength （Mpa）	Elongation at break (%)	Abrasion Index (mm³)	Adhesion between rubber and fabric （N/mm)		Adhesion between fabric (N/mm)
Standard	Tensile Strength （Mpa）	Elongation at break (%)	Abrasion Index (mm³)	≤1.5mm	＞1.5mm	Adhesion between fabric (N/mm)
DIN-Z	Min.15	Min.350	Max.250	Min.3.5	Min.4.5	Min.5
DIN-Y	Min.20	Min.400	Max.150	Min.3.5	Min.4.5	Min.5
DIN-W	Min.18	Min.400	Max.90	Min.3.5	Min.4.5	Min.5
DIN-X	Min.25	Min.450	Max.120	Min.3.5	Min.4.5	Min.5
RMA Standard
Standard	Tensile Strength （Mpa）	Elongation at break (100%)	Abrasion Index (mm³)	Adhesion between rubber and fabric （N/mm)		Adhesion between fabric (N/mm)
Standard	Tensile Strength （Mpa）	Elongation at break (100%)	Abrasion Index (mm³)	≤1.6mm	＞1.6mm	Adhesion between fabric (N/mm)
RMA1	Min.17	400	200	Min.3	Min.4.4	Min.4
RMA2	Min.14	400	250	Min.3	Min.4.4	Min.4
BS Standard
Standard	Tensile Strength （Mpa）	Elongation at break (100%)	Abrasion Index (mm³)	Adhesion between rubber and fabric （N/mm)		Adhesion between fabric (N/mm)
Standard	Tensile Strength （Mpa）	Elongation at break (100%)	Abrasion Index (mm³)	≤1.6mm	＞1.6mm	Adhesion between fabric (N/mm)
N	Min.17	400	-	Min.3	Min.4.4	Min.4
M	Min.24	400	-	Min.3	Min.4.4	Min.4

Feel free to contact our seles for special requirements.

Recommended Minimum Pulley Diameter

Fabric Type	Recommended Minimum Diameter*
Fabric Type	2ply	3ply	4ply	5ply	6ply	7ply	8ply
EP100	250	400	500	630	800	800	1000
EP150	315	400	630	800	800	1000	1250
EP200	415	500	630	800	1000	1000	1250
EP250	400	500	800	1000	1000	1250	1400
EP300	400	630	800	1000	1250	1250	1400
EP400	500	630	1000	1250	1250	1600	-